А вот еще забыл, блютуз:

Broadcom Bluetooth 4.0 USB
USB\VID_0489&PID_E032&REV_0112

Microsoft Bluetooth Enumerator
BTH\MS_BTHBRB

lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GeForce GT 630M (rev a1)
02:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)

[code h=200]lspci -vvv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Lenovo Device 3977
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d2000000-d30fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Lenovo Device 3977
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4159
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed19000
Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3901
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d3400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4171
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device 3977
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d3a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4179
Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Lenovo Device 3977
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d3a14000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4181
Kernel driver in use: mei

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 3977
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d3a19000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Lenovo Device 3977
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d3a10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4191
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d3900000-d39fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Device 3977
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d3800000-d38fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Device 3977
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 3977
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d3a18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd

00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
Subsystem: Lenovo Device 3977
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device 3977
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 4094 [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4090 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at d3a17000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c Data: 4169
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Lenovo Device 3977
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at d3a15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4040 [size=32]

01:00.0 VGA compatible controller: NVIDIA Corporation GeForce GT 630M (rev a1) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 3901
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 3000 [size=128]
Expansion ROM at d3000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>

02:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08)
Subsystem: Lenovo Device 3979
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d3900000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at 2000 [size=128]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [c0] MSI: Enable- Count=1/16 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [d8] MSI-X: Enable- Count=16 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [180 v1] Device Serial Number ff-73-b0-39-b8-88-e3-ff

03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
Subsystem: Broadcom Corporation Device 0587
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d3800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L1, Latency L0 <4us, L1 <64us
ClockPM+ Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-b9-ff-ff-a7-08-ed
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge[/code]

dmesg будет? :)

[code h=250]dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.6-2.10-desktop (geeko@buildhost) (gcc version 4.7.1 20120723 [gcc-4_7-branch revision 189773] (SUSE Linux) ) #1 SMP PREEMPT Thu Jul 26 09:36:26 UTC 2012 (641c197)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.4.6-2.10-desktop root=UUID=cce6a627-1070-4a38-94fd-1d8ab914e883 video=1366x768 resume=/dev/disk/by-id/ata-ST1000LM024_HN-M101MBB_S2U5J9AC728226-part6 splash=silent quiet showopts
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000baabf000 (usable)
[ 0.000000] BIOS-e820: 00000000baabf000 - 00000000baebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000baebf000 - 00000000bafbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bafbf000 - 00000000bafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001bf600000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN36WW(V3.02) 08/06/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1bf600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 180000000 mask FC0000000 write-back
[ 0.000000] 7 base 1BF600000 mask FFFE00000 uncachable
[ 0.000000] 8 base 1BF800000 mask FFF800000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
[ 0.000000] 0000000000 - 00bb000000 page 2M
[ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001bf600000
[ 0.000000] 0100000000 - 01bf600000 page 2M
[ 0.000000] kernel direct mapping tables up to 1bf600000 @ baab7000-baabf000
[ 0.000000] RAMDISK: 35f00000 - 36f78000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bafee000 09825 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bafbb000 00040
[ 0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001bf600000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001bf600000
[ 0.000000] NODE_DATA [00000001bf5ec000 - 00000001bf5fffff]
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b8c00000-ffff8801bdffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001bf600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000baabf
[ 0.000000] 0: 0x000bafff -> 0x000bb000
[ 0.000000] 0: 0x00100000 -> 0x001bf600
[ 0.000000] On node 0 totalpages: 1547341
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 745208 pages, LIFO batch:31
[ 0.000000] Normal zone: 10717 pages used for memmap
[ 0.000000] Normal zone: 773155 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000baabf000 - 00000000baebf000
[ 0.000000] PM: Registered nosave memory: 00000000baebf000 - 00000000bafbf000
[ 0.000000] PM: Registered nosave memory: 00000000bafbf000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:30600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801bf200000 s80192 r8192 d22208 u262144
[ 0.000000] pcpu-alloc: s80192 r8192 d22208 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1522283
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.6-2.10-desktop root=UUID=cce6a627-1070-4a38-94fd-1d8ab914e883 video=1366x768 resume=/dev/disk/by-id/ata-ST1000LM024_HN-M101MBB_S2U5J9AC728226-part6 splash=silent quiet showopts
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 6005420k/7329792k available (5721k kernel code, 1140428k absent, 183944k reserved, 5208k data, 944k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2195.122 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.24 BogoMIPS (lpj=2195122)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000038] Security Framework initialized
[ 0.000050] AppArmor: AppArmor initialized
[ 0.000610] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002403] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003176] Mount-cache hash table entries: 256
[ 0.003330] Initializing cgroup subsys cpuacct
[ 0.003332] Initializing cgroup subsys memory
[ 0.003344] Initializing cgroup subsys devices
[ 0.003346] Initializing cgroup subsys freezer
[ 0.003348] Initializing cgroup subsys net_cls
[ 0.003349] Initializing cgroup subsys blkio
[ 0.003354] Initializing cgroup subsys perf_event
[ 0.003397] CPU: Physical Processor ID: 0
[ 0.003398] CPU: Processor Core ID: 0
[ 0.003403] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003403] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003406] mce: CPU supports 7 MCE banks
[ 0.003419] CPU0: Thermal monitoring enabled (TM1)
[ 0.003425] using mwait in idle threads.
[ 0.004542] ACPI: Core revision 20120320
[ 0.025400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.035396] CPU0: Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz stepping 07
[ 0.137215] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.137220] PEBS disabled due to CPU errata.
[ 0.137223] ... version: 3
[ 0.137224] ... bit width: 48
[ 0.137225] ... generic registers: 4
[ 0.137226] ... value mask: 0000ffffffffffff
[ 0.137228] ... max period: 000000007fffffff
[ 0.137229] ... fixed-purpose events: 3
[ 0.137230] ... event mask: 000000070000000f
[ 0.145402] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.151227] Booting Node 0, Processors #1
[ 0.164364] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.168216] #2
[ 0.181443] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.185198] #3
[ 0.198424] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.198455] Brought up 4 CPUs
[ 0.198457] Total of 4 processors activated (17560.97 BogoMIPS).
[ 0.201776] devtmpfs: initialized
[ 0.202872] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.202949] RTC time: 7:55:02, date: 12/14/12
[ 0.202993] NET: Registered protocol family 16
[ 0.203187] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.203190] ACPI: bus type pci registered
[ 0.203257] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.203259] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.215282] PCI: Using configuration type 1 for base access
[ 0.215455] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.215457] mtrr: probably your BIOS does not setup all CPUs.
[ 0.215458] mtrr: corrected configuration.
[ 0.216134] bio: create slab <bio-0> at 0
[ 0.216214] ACPI: Added _OSI(Module Device)
[ 0.216216] ACPI: Added _OSI(Processor Device)
[ 0.216218] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.216220] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218302] ACPI: EC: Look up EC in DSDT
[ 0.220435] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.224633] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.226259] ACPI: SSDT 00000000bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.226818] ACPI: Dynamic OEM Table Load:
[ 0.226821] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.227190] ACPI: SSDT 00000000bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.227797] ACPI: Dynamic OEM Table Load:
[ 0.227799] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.227965] ACPI: SSDT 00000000bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.228521] ACPI: Dynamic OEM Table Load:
[ 0.228524] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.229869] ACPI: Interpreter enabled
[ 0.229873] ACPI: (supports S0 S3 S4 S5)
[ 0.229900] ACPI: Using IOAPIC for interrupt routing
[ 0.355526] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.355768] ACPI: No dock devices found.
[ 0.355772] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.356218] \_SB_.PCI0:_OSC invalid UUID
[ 0.356220] _OSC request data:1 8 1f
[ 0.356224] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.356931] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.356934] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.356936] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.356939] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.356968] PCI host bridge to bus 0000:00
[ 0.356970] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.356972] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.356974] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.356976] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.356984] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.357022] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.357054] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.357075] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.357086] pci 0000:00:02.0: reg 10: [mem 0xd3400000-0xd37fffff 64bit]
[ 0.357092] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.357097] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.357151] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.357175] pci 0000:00:14.0: reg 10: [mem 0xd3a00000-0xd3a0ffff 64bit]
[ 0.357253] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.357279] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.357304] pci 0000:00:16.0: reg 10: [mem 0xd3a14000-0xd3a1400f 64bit]
[ 0.357383] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.357418] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.357676] pci 0000:00:1a.0: reg 10: [mem 0xd3a19000-0xd3a193ff]
[ 0.359144] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.359174] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.359191] pci 0000:00:1b.0: reg 10: [mem 0xd3a10000-0xd3a13fff 64bit]
[ 0.359266] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.359292] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.359375] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.359403] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.359486] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.359526] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.359777] pci 0000:00:1d.0: reg 10: [mem 0xd3a18000-0xd3a183ff]
[ 0.361246] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.361276] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.361407] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.361427] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.361436] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.361444] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.361453] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.361462] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.361470] pci 0000:00:1f.2: reg 24: [mem 0xd3a17000-0xd3a177ff]
[ 0.361517] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.361538] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.361555] pci 0000:00:1f.3: reg 10: [mem 0xd3a15000-0xd3a150ff 64bit]
[ 0.361577] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 0.361643] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[ 0.361655] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.361668] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.361681] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.361690] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.361700] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.363226] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.363233] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.363240] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.363250] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.363418] pci 0000:02:00.0: [1969:1090] type 00 class 0x020000
[ 0.363508] pci 0000:02:00.0: reg 10: [mem 0xd3900000-0xd393ffff 64bit]
[ 0.363546] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
[ 0.363999] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.366247] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.366257] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.366266] pci 0000:00:1c.0: bridge window [mem 0xd3900000-0xd39fffff]
[ 0.366414] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
[ 0.366443] pci 0000:03:00.0: reg 10: [mem 0xd3800000-0xd3803fff 64bit]
[ 0.366596] pci 0000:03:00.0: supports D1 D2
[ 0.366597] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.368225] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.368239] pci 0000:00:1c.1: bridge window [mem 0xd3800000-0xd38fffff]
[ 0.368285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.368479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.368517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.368574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.368682] \_SB_.PCI0:_OSC invalid UUID
[ 0.368683] _OSC request data:1 1f 1f
[ 0.368687] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.368743] \_SB_.PCI0:_OSC invalid UUID
[ 0.368744] _OSC request data:1 0 1d
[ 0.368747] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.368749] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.372666] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.372723] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.372777] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.372833] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.372887] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.372940] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.372994] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.373048] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.373118] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.373125] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.373128] vgaarb: loaded
[ 0.373129] vgaarb: bridge control possible 0000:01:00.0
[ 0.373130] vgaarb: no bridge control possible 0000:00:02.0
[ 0.373235] SCSI subsystem initialized
[ 0.373278] libata version 3.00 loaded.
[ 0.373312] usbcore: registered new interface driver usbfs
[ 0.373323] usbcore: registered new interface driver hub
[ 0.373343] usbcore: registered new device driver usb
[ 0.373394] PCI: Using ACPI for IRQ routing
[ 0.374971] PCI: pci_cache_line_size set to 64 bytes
[ 0.375081] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.375083] reserve RAM buffer: 00000000baabf000 - 00000000bbffffff
[ 0.375085] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 0.375087] reserve RAM buffer: 00000001bf600000 - 00000001bfffffff
[ 0.375170] NetLabel: Initializing
[ 0.375172] NetLabel: domain hash size = 128
[ 0.375173] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.375185] NetLabel: unlabeled traffic allowed by default
[ 0.375213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.375220] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.377234] Switching to clocksource hpet
[ 0.379298] AppArmor: AppArmor Filesystem Enabled
[ 0.379316] pnp: PnP ACPI init
[ 0.379327] ACPI: bus type pnp registered
[ 0.379724] pnp 00:00: [bus 00-3e]
[ 0.379726] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.379728] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.379730] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.379733] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.379734] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.379736] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.379738] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.379740] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.379742] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.379744] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.379745] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.379748] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.379750] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.379752] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.379753] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.379755] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.379757] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.379759] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.379761] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.379820] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.379835] pnp 00:01: [io 0x0000-0x001f]
[ 0.379837] pnp 00:01: [io 0x0081-0x0091]
[ 0.379838] pnp 00:01: [io 0x0093-0x009f]
[ 0.379840] pnp 00:01: [io 0x00c0-0x00df]
[ 0.379842] pnp 00:01: [dma 4]
[ 0.379859] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.379868] pnp 00:02: [mem 0xff010000-0xffffffff]
[ 0.379886] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.379969] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.379988] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.379999] pnp 00:04: [io 0x00f0]
[ 0.380008] pnp 00:04: [irq 13]
[ 0.380025] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.380037] pnp 00:05: [io 0x002e-0x002f]
[ 0.380039] pnp 00:05: [io 0x004e-0x004f]
[ 0.380040] pnp 00:05: [io 0x0061]
[ 0.380042] pnp 00:05: [io 0x0063]
[ 0.380043] pnp 00:05: [io 0x0065]
[ 0.380045] pnp 00:05: [io 0x0067]
[ 0.380046] pnp 00:05: [io 0x0070]
[ 0.380048] pnp 00:05: [io 0x0080]
[ 0.380049] pnp 00:05: [io 0x0092]
[ 0.380051] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.380052] pnp 00:05: [io 0x0680-0x069f]
[ 0.380054] pnp 00:05: [io 0x1000-0x100f]
[ 0.380055] pnp 00:05: [io 0xffff]
[ 0.380057] pnp 00:05: [io 0xffff]
[ 0.380059] pnp 00:05: [io 0x0400-0x0453]
[ 0.380061] pnp 00:05: [io 0x0458-0x047f]
[ 0.380062] pnp 00:05: [io 0x0500-0x057f]
[ 0.380064] pnp 00:05: [io 0x164e-0x164f]
[ 0.380066] pnp 00:05: [io 0xfd60-0xfd63]
[ 0.380103] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.380106] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.380108] system 00:05: [io 0xffff] has been reserved
[ 0.380110] system 00:05: [io 0xffff] has been reserved
[ 0.380112] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.380114] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.380116] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.380119] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.380121] system 00:05: [io 0xfd60-0xfd63] has been reserved
[ 0.380124] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.380133] pnp 00:06: [io 0x0070-0x0077]
[ 0.380139] pnp 00:06: [irq 8]
[ 0.380156] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.380185] pnp 00:07: [io 0x0454-0x0457]
[ 0.380214] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.380217] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.380229] pnp 00:08: [io 0x0060]
[ 0.380231] pnp 00:08: [io 0x0064]
[ 0.380236] pnp 00:08: [irq 1]
[ 0.380254] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.380331] pnp 00:09: [irq 12]
[ 0.380353] pnp 00:09: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[ 0.440427] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.440429] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.440431] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.440432] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.440434] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
[ 0.440436] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.440437] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.440439] pnp 00:0a: [mem 0xff000000-0xff000fff]
[ 0.440441] pnp 00:0a: [mem 0xff010000-0xffffffff]
[ 0.440442] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.440444] pnp 00:0a: [mem 0xbfa00000-0xbfa00fff]
[ 0.440482] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.440484] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.440486] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.440489] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.440491] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.440493] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.440496] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.440498] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.440500] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.440503] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.440505] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.440508] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440919] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 0.440921] pnp 00:0b: [mem 0x40000000-0x401fffff]
[ 0.440969] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.440971] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
[ 0.440974] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.440994] pnp: PnP ACPI: found 12 devices
[ 0.440996] ACPI: ACPI bus type pnp unregistered
[ 0.447240] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.447268] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
[ 0.447271] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.447273] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.447276] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.447279] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.447283] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.447286] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.447292] pci 0000:00:1c.0: bridge window [mem 0xd3900000-0xd39fffff]
[ 0.447301] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.447306] pci 0000:00:1c.1: bridge window [mem 0xd3800000-0xd38fffff]
[ 0.447341] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.447342] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.447344] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.447346] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.447348] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.447350] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.447352] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.447354] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.447356] pci_bus 0000:02: resource 1 [mem 0xd3900000-0xd39fffff]
[ 0.447358] pci_bus 0000:03: resource 1 [mem 0xd3800000-0xd38fffff]
[ 0.447430] NET: Registered protocol family 2
[ 0.447611] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.448423] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.449697] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.449834] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.449836] TCP: reno registered
[ 0.449849] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.449882] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.450000] NET: Registered protocol family 1
[ 0.450016] pci 0000:00:02.0: Boot video device
[ 0.473311] PCI: CLS 64 bytes, default 64
[ 0.473351] Unpacking initramfs...
[ 0.727759] Freeing initrd memory: 16864k freed
[ 0.729778] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.729783] Placing 64MB software IO TLB between ffff8800b6ab7000 - ffff8800baab7000
[ 0.729785] software IO TLB at phys 0xb6ab7000 - 0xbaab7000
[ 0.729820] Simple Boot Flag at 0x44 set to 0x1
[ 0.730420] audit: initializing netlink socket (disabled)
[ 0.730435] type=2000 audit(1355471702.613:1): initialized
[ 0.749679] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.750332] VFS: Disk quotas dquot_6.5.2
[ 0.750359] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.750615] msgmni has been set to 11762
[ 0.750782] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.750812] io scheduler noop registered
[ 0.750814] io scheduler deadline registered
[ 0.750833] io scheduler cfq registered (default)
[ 0.750965] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.751146] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.751148] vesafb: scrolling: redraw
[ 0.751150] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.751991] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005800000, using 4160k, total 4160k
[ 0.829931] Console: switching to colour frame buffer device 170x48
[ 0.907552] fb0: VESA VGA frame buffer device
[ 0.907561] intel_idle: MWAIT substates: 0x21120
[ 0.907562] intel_idle: v0.4 model 0x2A
[ 0.907564] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.907599] GHES: HEST is not enabled!
[ 0.907635] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.908161] Non-volatile memory driver v1.3
[ 0.908162] Linux agpgart interface v0.103
[ 0.908222] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 0.908338] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.909493] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.909595] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.909685] ahci 0000:00:1f.2: version 3.0
[ 0.909755] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 0.909783] ahci: SSS flag set, parallel bus scan disabled
[ 0.920735] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.920744] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 0.920754] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.923145] scsi0 : ahci
[ 0.923226] scsi1 : ahci
[ 0.923283] scsi2 : ahci
[ 0.923341] scsi3 : ahci
[ 0.923398] scsi4 : ahci
[ 0.923453] scsi5 : ahci
[ 0.923551] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 41
[ 0.923553] ata2: DUMMY
[ 0.923556] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 41
[ 0.923557] ata4: DUMMY
[ 0.923558] ata5: DUMMY
[ 0.923559] ata6: DUMMY
[ 0.923607] Fixed MDIO Bus: probed
[ 0.923610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.923640] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.923644] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.923666] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.923702] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.927576] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.927592] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd3a19000
[ 0.932691] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.932746] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.932751] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.932757] usb usb1: Product: EHCI Host Controller
[ 0.932761] usb usb1: Manufacturer: Linux 3.4.6-2.10-desktop ehci_hcd
[ 0.932766] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.932870] hub 1-0:1.0: USB hub found
[ 0.932873] hub 1-0:1.0: 2 ports detected
[ 0.932937] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.932940] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.932946] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.932967] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.936842] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.936856] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd3a18000
[ 0.942680] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.942722] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.942727] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.942732] usb usb2: Product: EHCI Host Controller
[ 0.942737] usb usb2: Manufacturer: Linux 3.4.6-2.10-desktop ehci_hcd
[ 0.942741] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.942842] hub 2-0:1.0: USB hub found
[ 0.942847] hub 2-0:1.0: 2 ports detected
[ 0.942895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.942902] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.942952] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[ 0.958242] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.958267] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.958345] mousedev: PS/2 mouse device common for all mice
[ 0.958590] rtc_cmos 00:06: RTC can wake from S4
[ 0.958719] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.958747] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.958829] cpuidle: using governor ladder
[ 0.958924] cpuidle: using governor menu
[ 0.958925] EFI Variables Facility v0.08 2004-May-17
[ 0.959062] usbcore: registered new interface driver usbhid
[ 0.959063] usbhid: USB HID core driver
[ 0.959191] TCP: cubic registered
[ 0.959267] NET: Registered protocol family 10
[ 0.959458] lib80211: common routines for IEEE802.11 drivers
[ 0.959460] lib80211_crypt: registered algorithm 'NULL'
[ 0.959461] Registering the dns_resolver key type
[ 0.959916] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST1000LM024_HN-M101MBB_S2U5J9AC728226-part6
[ 0.973223] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.227453] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.234172] ata1.00: failed to enable AA (error_mask=0x1)
[ 1.234827] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
[ 1.234831] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.235422] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.241500] ata1.00: failed to enable AA (error_mask=0x1)
[ 1.242101] ata1.00: configured for UDMA/100
[ 1.242382] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
[ 1.242611] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.242615] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.242877] sd 0:0:0:0: [sda] Write Protect is off
[ 1.242881] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.243015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.349825] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.349835] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.350113] hub 1-1:1.0: USB hub found
[ 1.350176] hub 1-1:1.0: 6 ports detected
[ 1.416298] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4
[ 1.417758] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.453203] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.547102] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.547769] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 1.548855] ata3.00: configured for UDMA/100
[ 1.551443] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 1.567499] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.567508] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.567949] hub 2-1:1.0: USB hub found
[ 1.568120] hub 2-1:1.0: 6 ports detected
[ 1.642181] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[ 1.730857] Refined TSC clocksource calibration: 2195.014 MHz.
[ 1.730868] Switching to clocksource tsc
[ 1.733802] usb 1-1.3: New USB device found, idVendor=0489, idProduct=e032
[ 1.733811] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.733817] usb 1-1.3: Product: BCM20702A0
[ 1.733821] usb 1-1.3: Manufacturer: Broadcom Corp
[ 1.733825] usb 1-1.3: SerialNumber: 08EDB9A78566
[ 1.777489] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 1.801092] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 1.841800] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
[ 1.920626] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input1
[ 1.925733] PM: Hibernation image not present or could not be loaded.
[ 1.925760] registered taskstats version 1
[ 1.926372] Magic number: 8:719:925
[ 1.926451] rtc_cmos 00:06: setting system clock to 2012-12-14 07:55:04 UTC (1355471704)
[ 1.927722] Freeing unused kernel memory: 944k freed
[ 1.927823] Write protecting the kernel read-only data: 10240k
[ 1.928941] Freeing unused kernel memory: 404k freed
[ 1.929456] Freeing unused kernel memory: 176k freed
[ 1.941642] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b2e2
[ 1.941647] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.941651] usb 2-1.6: Product: Lenovo EasyCamera
[ 1.941655] usb 2-1.6: Manufacturer: Chicony Corp.
[ 1.960694] hp_sw: device handler registered
[ 1.961894] alua: device handler registered
[ 1.963051] emc: device handler registered
[ 1.964223] rdac: device handler registered
[ 1.968087] udevd[113]: starting version 182
[ 1.977061] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2
[ 1.977487] ACPI: Power Button [PWRB]
[ 1.977560] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input3
[ 1.978499] ACPI: Sleep Button [SLPB]
[ 1.979670] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 1.980422] ACPI: Lid Switch [LID0]
[ 1.980449] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.980454] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.980466] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.980603] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.980625] xhci_hcd 0000:00:14.0: irq 21, io mem 0xd3a00000
[ 1.980650] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.980689] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.980699] ACPI: Power Button [PWRF]
[ 1.980762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.980765] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.980768] usb usb3: Product: xHCI Host Controller
[ 1.980771] usb usb3: Manufacturer: Linux 3.4.6-2.10-desktop xhci_hcd
[ 1.980773] usb usb3: SerialNumber: 0000:00:14.0
[ 1.981608] xHCI xhci_add_endpoint called for root hub
[ 1.981612] xHCI xhci_check_bandwidth called for root hub
[ 1.981664] hub 3-0:1.0: USB hub found
[ 1.981675] hub 3-0:1.0: 4 ports detected
[ 1.981762] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.981770] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.981794] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.981797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.981800] usb usb4: Product: xHCI Host Controller
[ 1.981803] usb usb4: Manufacturer: Linux 3.4.6-2.10-desktop xhci_hcd
[ 1.981806] usb usb4: SerialNumber: 0000:00:14.0
[ 1.982616] xHCI xhci_add_endpoint called for root hub
[ 1.982620] xHCI xhci_check_bandwidth called for root hub
[ 1.982658] hub 4-0:1.0: USB hub found
[ 1.982669] hub 4-0:1.0: 4 ports detected
[ 1.984227] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.984234] ACPI: Thermal Zone [TZ00] (50 C)
[ 1.984297] wmi: Mapper loaded
[ 1.986154] [drm] Initialized drm 1.1.0 20060810
[ 1.992962] i915 0000:00:02.0: setting latency timer to 64
[ 1.996239] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 2.058720] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.058728] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.058730] [drm] Driver supports precise vblank timestamp query.
[ 2.058796] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 2.058851] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.058853] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 2.495914] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.577403] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 2.577406] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.577421] Console: switching to colour dummy device 80x25
[ 2.578077] fbcon: inteldrmfb (fb0) is primary device
[ 2.881654] Console: switching to colour frame buffer device 170x48
[ 2.884268] fb0: inteldrmfb frame buffer device
[ 2.884269] drm: registered panic notifier
[ 2.884473] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.886700] acpi device:38: registered as cooling_device4
[ 2.886905] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input6
[ 2.886971] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 2.896299] acpi device:44: registered as cooling_device5
[ 2.896504] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 2.896560] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.896580] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.896894] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1480a1)
[ 2.905675] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 2.915386] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 2.915388] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[ 2.915447] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 2.915448] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[ 2.915450] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 2.915452] [drm] nouveau 0000:01:00.0: Checking PCIROM for VBIOS
[ 2.915579] nouveau 0000:01:00.0: Invalid ROM contents
[ 2.915666] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 2.915668] [drm] nouveau 0000:01:00.0: No valid VBIOS image found
[ 3.856673] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[ 3.856678] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 3.856687] PM: Marking nosave pages: [mem 0x40000000-0x401fffff]
[ 3.856695] PM: Marking nosave pages: [mem 0xbaabf000-0xbaffefff]
[ 3.856715] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff]
[ 3.857600] PM: Basic memory bitmaps created
[ 3.878886] PM: Basic memory bitmaps freed
[ 3.878890] video LNXVIDEO:00: Restoring backlight state
[ 3.878892] video LNXVIDEO:01: Restoring backlight state
[ 3.959193] PM: Starting manual resume from disk
[ 3.959197] PM: Hibernation image partition 8:6 present
[ 3.959198] PM: Looking for hibernation image.
[ 3.959395] PM: Image not found (code -22)
[ 3.959398] PM: Hibernation image not present or could not be loaded.
[ 4.174401] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 4.508307] EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr
[ 9.483498] udevd[278]: starting version 182
[ 10.088052] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 12.033198] EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr
[ 12.158384] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 12.159059] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[ 12.159441] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[ 12.159780] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.183943] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 13.183946] EDD information not available.
[ 14.884914] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 14.885002] ACPI: AC Adapter [ACAD] (on-line)
[ 14.900237] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.900650] mei 0000:00:16.0: setting latency timer to 64
[ 14.900718] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 14.903947] bcma: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 14.903980] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 14.904006] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 14.904094] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 14.904724] iTCO_vendor_support: vendor-support=0
[ 14.906086] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 14.906096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.907711] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 14.919649] bcma: Bus registered
[ 15.087336] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 15.087344] ACPI: Battery Slot [BAT1] (battery present)
[ 15.089528] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 15.089637] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 15.089693] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.092854] cfg80211: Calling CRDA to update world regulatory domain
[ 15.093194] input: Ideapad extra buttons as /devices/platform/ideapad/input/input9
[ 15.097314] b43-phy0: Broadcom 4313 WLAN found (core revision 24)
[ 15.098170] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
[ 15.098761] b43: probe of bcma0:0 failed with error -95
[ 15.098780] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 15.100481] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 15.100753] ieee80211 phy1: brcmsmac: fail to load firmware brcm/bcm43xx-0.fw
[ 15.101412] ieee80211 phy1: brcmsmac: Failed to find firmware usually in /lib/firmware/brcm
[ 15.102012] brcmsmac: brcms_bcma_probe: brcms_attach failed!
[ 15.531521] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.531568] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 15.537158] sr0: scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 15.537168] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 15.537338] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 15.606403] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 15.783032] Linux video capture interface: v2.00
[ 15.784025] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
[ 15.786017] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input10
[ 15.786155] usbcore: registered new interface driver uvcvideo
[ 15.786158] USB Video Class driver (1.1.1)
[ 16.118999] hda_codec: CX20590: BIOS auto-probing.
[ 16.119006] ALSA hda_codec.c:5101 autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 16.119009] ALSA hda_codec.c:5105 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.119012] ALSA hda_codec.c:5109 hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 16.119013] ALSA hda_codec.c:5110 mono: mono_out=0x0
[ 16.119015] ALSA hda_codec.c:5114 inputs:
[ 16.119017] ALSA hda_codec.c:5118 Mic=0x1a
[ 16.119019] ALSA hda_codec.c:5118 Internal Mic=0x1b
[ 16.119021] ALSA hda_codec.c:5120
[ 16.119824] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 16.119899] ALSA patch_conexant.c:4513 hda_codec: Enable sync_write for stable communication
[ 16.124891] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 16.125109] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 16.125191] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 19.019846] cfg80211: World regulatory domain updated:
[ 19.019849] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.019852] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.019855] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.019857] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.019859] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.019861] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.956452] Adding 2107388k swap on /dev/sda6. Priority:-1 extents:1 across:2107388k
[ 23.072835] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 24.891337] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 24.896271] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 24.898461] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.978635] vboxdrv: Found 4 processor cores.
[ 25.978827] vboxdrv: fAsync=0 offMin=0x1ca offMax=0xe4a
[ 25.978893] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 25.978896] vboxdrv: Successfully loaded version 4.1.18_OSE (interface 0x00190000).
[ 26.184808] vboxpci: IOMMU not found (not registered)
[ 68.022738] EXT4-fs (sda7): re-mounted. Opts: acl,user_xattr,commit=0
[ 68.210926] EXT4-fs (sda8): re-mounted. Opts: acl,user_xattr,commit=0
[ 112.358417] fuse init (API version 7.18)
[/code]

Мне не подходят приведенные выше советы, т.к. подразумевается качать что-то из линукса, а я могу качать ТОЛЬКО из Windows, по причине отсутствия в линукс сетевых интерфейсов.

Вы можете адаптировать приведенные советы для openSUSE?

описание инсталяции драйвера взято отсюда.

1. качаем в windows эти два файла
http://bues.ch/b43/fwcutter/b43-fwcutter-017.tar.bz2
http://www.lwfinger.com/b43-firmware/broadcom-wl-5.100.138.tar.bz2

2. записываем на флешку или оставляем на разделе с windows и перегружаемся в linux
3. подключаем флешку или windows раздел, и выполняем следующее:

И перегрузиться

Спасибо.
Пока игрался, завалил Сюсю, поставил Убунту 12.10. Вот пока не обновлялся (210 пакетов), беспроводная и проводная сети работали, кроме блютуза, но он пока не нужен. Обновился и снова та же беда.
Предыдущий совет #7 поможет в Убунте? Вернулся на Убунту.
Устал уже от этого.

Может, не входит в рамки вопроса, но если я вижу строку вроде

sudo apt-get nnnnnnnnnnnn

то как отдельно скачать этот самый пакет nnnnnnnnnnnn из Windows? Перед этим команда подключения репозитория.

Судя по всему у вас довольно таки неудачный надор железа для сети. И ethernet и wifi карточки поддерживаются производителями с помощью блобов (бинарных драйверов), отсюда такой геморой.
Можете показать dmesg от ubuntu?

По ссылке что я давал раньше, там есть установка драйверов для убунты.

выдаст подобное


Вот эти ссылки (у вас они будут другие) можно скачать в windows, и установить


PS
Убунта более удачный выбор, так как она более распространена и по ней легче получить помощь.
PPS
Для интерактивной помощи можно зайти на #linux в IRC сети RusNet

О! Спасибо!

Во первых, если ubuntu, то 12.04, так как 12.10 - глюкодром.
Во вторых, для этого вайфая не подходит b43. Нужно собирать wl.ko (в убунте есть менеджер драйверов, который сам качает и собирает, только подключиться нужно по проводу) и возможно заносить в blacklist b43. На форуме слаки пишут, что может быть потребуется слегка поправить драйвер http://www.slackware.ru/forum/viewtopic.php?f=30&t=532
В третьих, bluetooth здесь с кривой прошивкой в ROM, так что нужно загружать патч. Как это делать можно почитать на форуме арча: https://bbs.archlinux.org/viewtopic.php?id=133093&p=1

Спасибо!
Вечером гляну.
Про 12.10 не знал, но и 12.04 нет. Буду качать.

Получилось, пакеты скачал непосредственно из Убунту, подключив мобильный телефон по шнурку.
Но после перезагрузки при включении вайфая система виснет. Я думал, задумалась на пару минут. Но и через пару часов она висела.
Что бы еще могло быть?

Но после перезагрузки при включении вайфая система виснет.

brcm80211 и b43 в черный список занесли?
Компьютер после этого выключали?
После венды компьютер выключали? (Просто перезагрузки может быть недостаточно)

brcm80211 и b43 в черный список занесли?

как это сделать?

Компьютер после этого выключали?

перегружал. вчерась выключал.

После венды компьютер выключали?

Эту фразу не понял. Перегружался - точно. Я же не шил микропрограмму вайфая, или это как раз и есть - загрузить firmware?
sudo apt-get install firmware-b43-installer

brcm80211 и b43 в черный список занесли?

как это сделать?

у меня в дебиан:
занести в файл /etc/modprobe.d/blacklist.conf

занести в файл /etc/modprobe.d/blacklist.conf

Насколько я понимаю, .conf - системный текстовый файл.
sudo gedit /etc/modprobe.d/blacklist.conf открыл этот файл в режиме записи, и в нём уже есть такие строки, похожие на Ваши:

# replaced by b43 and ssb.
blacklist bcm43xx

Это на рабочей машине. Дома посмотрю, что вообще творится в том файле.

Спасибо!

Проделал все манипуляции, ничего не вышло. Хотя нет, перестал зависать при включении вайфая -- теперь безболезненно вайфай включается/отключается из панели инструментов или по кнопке с клавиатуры.

Сетей не виит.
Если задать имя сети вручную, циклически пытается подключится и требует пароль.

В источниках приложений обнаружил новую вкладку "Дополнительные драйверы".
Там вклюил использование проприетарного драйвера беспроводной сети и всё заработало. Странно.

Ramok, теперь помогите, пожалуйста, с блютузом.

В верхней командной панели, слева от часов кликаю по значку блютуза, в выпадающем меню выбираю "Включить Bluetooth", значок блютуза загорается, но компьютер не видит сам других устройств и таже невидим для них.

Открываю параметры блютуза, напись "блютуз отключен", слайдер в положении выключен. Я включаю и при повторном открытии параметров блютуза он снова выключен. Также недоступен переключатель видимости, и надпись "блютуз отключен" не меняется.

Убедитесь что у вас стоят пакеты bluez и bluez-utils. Если опять проблемы, то покажите dmesg и посмотрите что в /var/log/syslog

Ок. Вечером дома проверю.
Как проверить наличие пакетов bluez и bluez-utils?
Может их установить apt-get install?
Просто на предыдущих двух ноутбуках с убунтой никаких проблем не было, в отличие от Windows.

Из командной строки можно проверить командой

И да, их можно установить с помощью sudo apt-get install.

PS
Рекомендую поставить synaptic, графический frontend для apt, как более привычные gui программы. В ней можно смотреть работать с установленными пакетами, как и искать и устанавливать из репозитория.

synaptic я поставил, "Центр приложений" не нравится.

Убедитесь что у вас стоят пакеты bluez и bluez-utils. Если опять проблемы, то покажите dmesg и посмотрите что в /var/log/syslog

Естественно стоят. Ubuntu же.
Иначе никаких значков на панели не было бы как и попыток включить bluetooth.

Я уже писал, что этот bluetooth адаптер имеет кривую прошивку в ROM, поэтому перед использованием нужно грузить патч (после каждого отключения питания). Подробнее написано здесь: https://bbs.archlinux.org/viewtopic.php?id=133093&p=1

Модуль btusb (или как он там в вашем ядре называется) загружен?
Выложите вывод команды lsmod.
Вывод команды hciconfig -a.
И на всякий случай lsusb -v.

Каюк системе. Сетевые устройства недоступны, пишет, устройство отклюено аппаратно.
Хотя в Windows работает.
Буду переустанавливать систему, на 12.04