Консультация № 19878
17.04.2005, 18:13
0.00 руб.
0 3 3
Помоги установить дрова на модем. В приложении док для него. Пишу в консоли то что там написано ничего не устанавливается. Удаленник не видит мой модем. Пробовал драйвер открыть кликом, запускается оболочка у становки, после нескольких кликов запрашивается нейкий пароль, что делать?

Приложение:
=====================================System Requirements, Installation, and Technical Support=====================================Read this IMPORTANT information before downloading.=====================================System Requirements:=====================================The driver has been tested only with Red Hat 7.1, which requires a Linux kernel V2.4 and is not backwardly compatible with V2.2. This driver supports AMR (Intel chipset only), PCI I, and PCI II hardware platforms. System requirements are otherwise the same as for PCI modems.=====================================NOTE: =====================================To maximize modem performance, enable Direct Memory Access (DMA) for your Integrated Drive Electronics (IDE) hard drives. Enabling DMA on your system may require an 80-pin cable for your IDE drives. Please consult your PC manufacturer or system documentation.The SM56 Linux driver does not support Symmetric MultiProcessing (SMP) or concurrent processing by multiple processors.=====================================Upgrade:=====================================To upgrade the SM56 Linux driver, first remove the previous RPM and then install the current version. To remove the previous RPM issue the following command logged in as root:#rpm -e sm56=====================================Installation:=====================================To install the driver, copy the RPM file to your system and issue the following commands logged in as root:#rpm -Uvh sm56-85.1-10.i386.rpm#sm56setup [country-code]The default country code is the United States. See the SM56 man page for a list of valid country codes.=====================================Technical Support:=====================================While we provide a fully functional SM56 data/fax softmodem for Linux, no customer support is available for this driver. Use it at your own discretion.

Обсуждение

давно
Посетитель
1018
145
17.04.2005, 19:01
общий
это ответ
Здравствуйте, CJ!
CJ, ключевой вопрос - дистрибъютив и версия ядра. После бесплодных попыток установить дрова для этого модема на систему отличную от той которая в доках указана, я пытался выяснить, а возможно ли это вообще - где-то прочитал что пока что ни у кого не получилось Кажется дрова есть еще для Рэд Хэта более поздних версий, и для СуСЕ
Неизвестный
18.04.2005, 05:23
общий
это ответ
Здравствуйте, CJ!
Ответ ты уже написал:
the following commands logged in as root:
#rpm -Uvh sm56-85.1-10.i386.rpm
#sm56setup [country-code]
The default country code is the United States. See the SM56 man page for a list of valid country codes.
Неизвестный
18.04.2005, 12:55
общий
это ответ
Здравствуйте, CJ!
Нужно запускать установку из-под рута - наверное, его пароль у тебя и спрашивают.
$su root
Password:
Вводишь пароль рута.
#rpm -Uvh packet_name
U - для обновления, v - вывод инфы о процедуре установки на экран, h - для форматированного вывода.
(По-моему, можно набрать и rpm -i packet-name...)
Дальше смотришь код страны:
#man SM56
И ищешь там свою страну. Запоминаешь ее код. :)
Запускаешь в том месте, где лежит sm56setup:
#./sm56setup код_страны
Вроде должно получиться. Если нет - пиши где именно какие ошибки.
Форма ответа